CAM tool library
CAM tool library
Import every catalogue order code with its dimensions into your CAM system in one step. Start values come only from the cutting-data tables in the Geppetto catalogue.
Download the full library (ZIP) · 1391 KB
Formats in the package
Fusion JSON
Fusion Tool Library import file: type, d1, d2, l1, l2, R, angle, Z and coating; start values per material for tools with catalogue cutting data.
CSV
Semicolon-separated table for spreadsheets, ERP and tool management, with a CAD link for every code.
ISO 13399 symbols
Simplified table with DC, DCONMS, OAL, APMX, LU, RE, SIG, NOF column names (not a full ISO 13399 package).
Cutting data CSV
Catalogue cutting data per tool, each row with source page and table row.
Import into Fusion
- Unzip the file.
- In Fusion open Manufacture > Manage > Tool Library.
- Right-click Local > Import tool library and choose the .json file.
- Assign your holder and set LB (length below holder) for your setup.
Good to know
- Cutting data are catalogue start values; verify them for your machine, clamping and material.
- No start values are written where the catalogue has no table for that series or diameter; ask us for these tools.
- Corner chamfers are not modelled in Fusion; these tools are imported as flat end mills.
- Plunge and ramp feeds are not in the catalogue and are left empty for milling tools.
- MCR corner rounding and MCSR circle segment tools are in the CSV only.
Download by series
| Series | Codes | Fusion type | Catalogue cutting data | Library | CAD |
|---|---|---|---|---|---|
| MS | 34 | flat end mill | yes | – | 0 |
| MST | 6 | flat end mill | no | – | 0 |
| MCL | 14 | flat end mill | partial | – | 0 |
| MCX | 8 | flat end mill | no | – | 0 |
| MR | 20 | bull nose end mill | no | – | 0 |
| MSR | 6 | bull nose end mill | no | – | 0 |
| MLR | 17 | bull nose end mill | no | – | 0 |
| MCR-XL | 5 | bull nose end mill | no | – | 0 |
| MSXM | 4 | flat end mill | yes | – | 0 |
| MF1C | 11 | flat end mill | partial | – | 0 |
| MPR | 16 | bull nose end mill | yes | – | 0 |
| MC | 16 | flat end mill | yes | – | 0 |
| MRS | 16 | flat end mill | yes | – | 0 |
| MCR | 6 | CSV only | no | – | 0 |
| C90-C60 | 12 | chamfer mill | no | – | 0 |
| AS | 11 | bull nose end mill | partial | – | 0 |
| ASL | 8 | bull nose end mill | partial | – | 0 |
| MPA | 10 | flat end mill | no | – | 0 |
| MA | 10 | flat end mill | no | – | 0 |
| BX | 60 | flat end mill | no | – | 0 |
| MBDT | 7 | ball end mill | no | – | 0 |
| MB | 28 | ball end mill | partial | – | 0 |
| MBL | 20 | ball end mill | no | – | 0 |
| MBX | 8 | ball end mill | no | – | 0 |
| MBM | 2 | ball end mill | no | – | 0 |
| MBT | 2 | ball end mill | no | – | 0 |
| MBN | 3 | ball end mill | yes | – | 0 |
| MDS | 42 | ball end mill | partial | – | 0 |
| MDR | 74 | bull nose end mill | partial | – | 0 |
| MDB | 42 | ball end mill | partial | – | 0 |
| MCSR2 | 3 | CSV only | no | – | 0 |
| MCSR3 | 4 | CSV only | no | – | 0 |
| MC60 | 5 | chamfer mill | no | – | 0 |
| MC90 | 7 | chamfer mill | no | – | 0 |
| MC01 | 27 | tapered mill | no | – | 0 |
| MC05 | 27 | tapered mill | no | – | 0 |
| MCS | 27 | tapered mill | no | – | 0 |
| MD90 | 4 | chamfer mill | no | – | 0 |
| DT50 | 20 | drill | no | – | 0 |
| DT80 | 20 | drill | no | – | 0 |
| D30 | 146 | drill | yes | – | 0 |
| D32 | 146 | drill | yes | – | 0 |
| D50 | 146 | drill | yes | – | 0 |
| D52 | 146 | drill | yes | – | 0 |
| D82 | 113 | drill | yes | – | 0 |
| NC | 16 | spot drill | no | – | 0 |
| DC | 11 | center drill | no | – | 0 |
| D181 | 9 | drill | no | – | 0 |
| D181F | 9 | drill | no | – | 0 |
| DK | 14 | drill | no | – | 0 |
| DSF | 20 | drill | no | – | 0 |
| GT30 | 8 | chamfer mill | no | – | 0 |
| GT45 | 8 | chamfer mill | no | – | 0 |
| GT60 | 8 | chamfer mill | no | – | 0 |
| GT90 | 8 | chamfer mill | no | – | 0 |
| GT180 | 8 | flat end mill | no | – | 0 |
| RH | 28 | reamer | no | – | 0 |
| RS | 29 | reamer | no | – | 0 |
Related tools
Get technical support and a quote for your project
Send us your drawing or requirements and we will get back to you on tool selection, geometry and regrinding.