Carbide chamfer mills (60° / 90°)
Solid carbide tools for chamfering, deburring and taper machining: 60° and 90° chamfer mills, a tapered carbide end mill and a 90° forward deburring tool.
Chamfer mills are used to put an angled chamfer on part edges and to remove burrs. The catalogue series are listed below by diameter range, number of flutes and coating; dimension tables are on the product pages.
Quick selection guide
- 90° chamfer: MC90 series (Z3–Z6).
- 60° chamfer: MC60 series (Z4–Z6).
- C90-C60 chamfer mill series (Ø6–Ø16, Z4).
- Forward deburring: MD90 (90°); taper machining: tapered carbide end mill (TiSiN).
Get a quote / Send a drawing
Subject: Carbide chamfer mills (60° / 90°). Message us on WhatsApp or by e-mail and attach your drawing or a dimensioned sketch. The product/page name is added automatically – just add material, size and quantity.
- 1Drawing or dimensions
- 2Material and quantity
- 3Quote and feasibility reply
Compare the series
| Series | Diameter | Z | Coating |
|---|---|---|---|
| MC9090° carbide chamfer mill | Ø2 - Ø12 | 3-4-5-6 | AlTiN |
| MC6060° carbide chamfer mill | Ø4 - Ø12 | 4-5-6 | AlTiN |
| C90-C60 (Z4)Chamfering end mills | Ø6 - Ø16 | 4 | AlTiN |
| MD9090° forward deburring tool | Ø2 - Ø6 | 3-4 | AlCrN |
| MC (Z3)Tapered carbide end mill | Ø2 - Ø3 | 3 | TiSiN |
Frequently asked questions
Which series are suitable for chamfering and deburring?
Our catalogue has 5 series for this application: MC90, MC60, C90-C60 (Z4), MD90, MC (Z3). Overall diameter range: Ø2–Ø16 mm.
Which coatings are available in these series?
The series on this page are available with: AlTiN (high heat resistance), AlCrN (wear resistance), TiSiN (extreme hardness).
Which tool for deburring?
The MD90 series is a 90° forward deburring tool; the catalogue lists it in Ø2–Ø6, Z3–Z4, AlCrN coated.
How do I get a quote or send a drawing?
Use the “Get a quote / Send a drawing” section on this page to write to us on WhatsApp (+90 537 777 96 44) or by e-mail (info@geppetto-tr.com); you can attach your drawing. The product or page name is added to your message automatically. You can also use the quote form.
Get a quote / Send a drawing
Subject: Carbide chamfer mills (60° / 90°). Message us on WhatsApp or by e-mail and attach your drawing or a dimensioned sketch. The product/page name is added automatically – just add material, size and quantity.
- 1Drawing or dimensions
- 2Material and quantity
- 3Quote and feasibility reply