MDR Series
Ball nose series, corner radius, standard length
| Product group | Solid Carbide End Mill |
|---|---|
| Diameter range | Ø1 - Ø4 |
| Number of flutes (Z) | 2-4 |
| Coating | TiSiN |
See the product catalogue for dimension tables and order codes. Contact our technical team for special dimensions and tolerances.
Calculate speed and feed for this end mill →
Get a quote for this series
The product code is added to your message automatically. Just add diameter, length and quantity.
Dimensions and order codes
Values are taken from the table in the Geppetto product catalogue; dimensions in mm. For a quotation, send the order code and quantity.
Scroll the table sideways ↔
| Order code | d1 h10 | l1 | l2 | l3 | d2 h6 | d3 | R | Z |
|---|---|---|---|---|---|---|---|---|
| MDR01-0102-L04-TS | 1 | 50 | 0.8 | 4 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L04-TS | 1 | 50 | 0.8 | 4 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L06-TS | 1 | 50 | 0.8 | 6 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L06-TS | 1 | 50 | 0.8 | 6 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L08-TS | 1 | 50 | 0.8 | 8 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L08-TS | 1 | 50 | 0.8 | 8 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L10-TS | 1 | 50 | 0.8 | 10 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L10-TS | 1 | 50 | 0.8 | 10 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L12-TS | 1 | 50 | 0.8 | 12 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L12-TS | 1 | 50 | 0.8 | 12 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L14-TS | 1 | 50 | 0.8 | 14 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L14-TS | 1 | 50 | 0.8 | 14 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L16-TS | 1 | 50 | 0.8 | 16 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L16-TS | 1 | 50 | 0.8 | 16 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L18-TS | 1 | 65 | 0.8 | 18 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L18-TS | 1 | 65 | 0.8 | 18 | 4 | 0.94 | 0.2 | 2 |
| MDR01-0102-L20-TS | 1 | 65 | 0.8 | 20 | 4 | 0.94 | 0.1 | 2 |
| MDR02-0102-L20-TS | 1 | 65 | 0.8 | 20 | 4 | 0.94 | 0.2 | 2 |
| MDR02-0152-L06-TS | 1.5 | 50 | 1.35 | 6 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0152-L08-TS | 1.5 | 50 | 1.35 | 8 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0152-L10-TS | 1.5 | 50 | 1.35 | 10 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0152-L12-TS | 1.5 | 50 | 1.35 | 12 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0152-L16-TS | 1.5 | 50 | 1.35 | 16 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0152-L20-TS | 1.5 | 65 | 1.35 | 20 | 4 | 1.42 | 0.2 | 2 |
| MDR02-0202-L06-TS | 2 | 50 | 1.7 | 6 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L06-TS | 2 | 50 | 1.7 | 6 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L08-TS | 2 | 50 | 1.7 | 8 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L08-TS | 2 | 50 | 1.7 | 8 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L10-TS | 2 | 50 | 1.7 | 10 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L10-TS | 2 | 50 | 1.7 | 10 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L12-TS | 2 | 50 | 1.7 | 12 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L12-TS | 2 | 50 | 1.7 | 12 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L16-TS | 2 | 50 | 1.7 | 16 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L16-TS | 2 | 50 | 1.7 | 16 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L20-TS | 2 | 65 | 1.7 | 20 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L20-TS | 2 | 65 | 1.7 | 20 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L25-TS | 2 | 65 | 1.7 | 25 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L25-TS | 2 | 65 | 1.7 | 25 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0202-L30-TS | 2 | 65 | 1.7 | 30 | 4 | 1.92 | 0.2 | 2 |
| MDR05-0202-L30-TS | 2 | 65 | 1.7 | 30 | 4 | 1.92 | 0.5 | 2 |
| MDR02-0252-L12-TS | 2.5 | 50 | 2.25 | 12 | 4 | 2.4 | 0.2 | 2 |
| MDR05-0252-L12-TS | 2.5 | 50 | 2.25 | 12 | 4 | 2.4 | 0.5 | 2 |
| MDR02-0252-L16-TS | 2.5 | 50 | 2.25 | 16 | 4 | 2.4 | 0.2 | 2 |
| MDR05-0252-L16-TS | 2.5 | 50 | 2.25 | 16 | 4 | 2.4 | 0.5 | 2 |
| MDR02-0252-L20-TS | 2.5 | 65 | 2.25 | 20 | 4 | 2.4 | 0.2 | 2 |
| MDR05-0252-L20-TS | 2.5 | 65 | 2.25 | 20 | 4 | 2.4 | 0.5 | 2 |
| MDR02-0304-L10-TS | 3 | 57 | 2.5 | 10 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L10-TS | 3 | 57 | 2.5 | 10 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L12-TS | 3 | 57 | 2.5 | 12 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L12-TS | 3 | 57 | 2.5 | 12 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L16-TS | 3 | 57 | 2.5 | 16 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L16-TS | 3 | 57 | 2.5 | 16 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L20-TS | 3 | 65 | 2.5 | 20 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L20-TS | 3 | 65 | 2.5 | 20 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L25-TS | 3 | 65 | 2.5 | 25 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L25-TS | 3 | 65 | 2.5 | 25 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L30-TS | 3 | 80 | 2.5 | 30 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L30-TS | 3 | 80 | 2.5 | 30 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0304-L35-TS | 3 | 80 | 2.5 | 35 | 6 | 2.88 | 0.2 | 4 |
| MDR05-0304-L35-TS | 3 | 80 | 2.5 | 35 | 6 | 2.88 | 0.5 | 4 |
| MDR02-0404-L12-TS | 4 | 57 | 3.5 | 12 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L12-TS | 4 | 57 | 3.5 | 12 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L16-TS | 4 | 57 | 3.5 | 16 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L16-TS | 4 | 57 | 3.5 | 16 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L20-TS | 4 | 65 | 3.5 | 20 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L20-TS | 4 | 65 | 3.5 | 20 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L25-TS | 4 | 65 | 3.5 | 25 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L25-TS | 4 | 65 | 3.5 | 25 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L30-TS | 4 | 80 | 3.5 | 30 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L30-TS | 4 | 80 | 3.5 | 30 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L35-TS | 4 | 80 | 3.5 | 35 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L35-TS | 4 | 80 | 3.5 | 35 | 6 | 3.85 | 0.5 | 4 |
| MDR02-0404-L40-TS | 4 | 80 | 3.5 | 40 | 6 | 3.85 | 0.2 | 4 |
| MDR05-0404-L40-TS | 4 | 80 | 3.5 | 40 | 6 | 3.85 | 0.5 | 4 |
Cutting data, materials and coating
Suitable workpiece materials
- PISO P · Steel
- MISO M · Stainless
- NISO N · Aluminium
- HISO H · Hardened
Coating
TiSiN (extreme hardness)
Recommended cutting data ranges
| ISO group | n (rpm) | Vf (mm/min) |
|---|---|---|
| P Steel | 7710–32400 | 315–1650 |
| M Stainless | 8170–29150 | 360–1490 |
| N Aluminium | 10900–39000 | 480–1980 |
| H Hardened | 6350–24300 | 200–990 |
Values are starting recommendations; adjust them to machine rigidity, clamping, tool length and coolant.
Frequently asked questions
Which materials is MDR Series suitable for?
MDR Series is used in ISO material groups P/M/N/H: Steel, Stainless, Aluminium, Hardened.
Which diameters and flute counts does MDR Series come in?
MDR Series is available in Ø1 - Ø4 with Z2-4 flutes. Other sizes can be made to drawing.
Which coating does MDR Series have?
MDR Series coating: TiSiN (extreme hardness).
What are the recommended cutting speed and feed for MDR Series?
Geppetto Product Catalogue 2026 (p. 145): ISO P: n 7710–32400 rpm, Vf 315–1650 mm/min; ISO M: n 8170–29150 rpm, Vf 360–1490 mm/min; ISO N: n 10900–39000 rpm, Vf 480–1980 mm/min; ISO H: n 6350–24300 rpm, Vf 200–990 mm/min. These are starting values; use the calculator to get spindle speed and feed for your diameter.
Can MDR Series be reground?
Yes. Geppetto offers CNC regrinding, Drag Finish edge preparation and PVD recoating for carbide end mills, drills and reamers.
